400-666-5501

Welcome to the official website of Zhejiang Beizhong Technology Co., Ltd!

CN/EN

简介
More

The company has strong R&D capabilities and a wide range of product applications, including online monitoring of gas pollution sources, online monitoring of water pollution sources, process analysis, and process safety.

Product Center

简介
More

Since its establishment, Zhejiang Beizhong Technology Co., Ltd. has made significant progress through the joint efforts of all employees. Today, the company's products have integrated technologies from multiple fields such as optics, microelectronics, software, communication, electromechanical engineering, and analytical chemistry. It is one of the few in the world that simultaneously possesses gas analysis and detection, water quality analysis and detection, and dust analysis.

About Us

简介
More

Since its establishment, the company has continuously explored and innovated in the field of environmental monitoring, with multiple national patents and software copyrights. The company's products have integrated technologies from multiple fields such as optics, microelectronics, software, communication, electromechanical engineering, and analytical chemistry. It is one of the few in the world that simultaneously possesses gas analysis and detection, water quality analysis and detection, and dust analysis. Provide online continuous monitoring of heavy metals in agricultural flue gas and online monitoring solutions for the cement industry.

SOLUTION

简介
More

If you are interested in our company and our products, please feel free to visit our company or our local office for investigation. You can also communicate with us through online consultation, submission of demand forms, sending emails, calling consultation numbers, and other methods!

CONTACT US

Home >> 新闻资讯 >>公司新闻 >> 烟气在线监测系统安装前厂家需要做哪些准备?
Details

烟气在线监测系统安装前厂家需要做哪些准备?

Time:2020-11-12     Author:北中科技   Read

      在新的环保政策,各个行业都被严格要求,砖瓦行业也不列外,响应国家政策安装烟气在线监测系统是必然的,现在新泽仪器就告诉大家安装烟气在线监测系统前,厂家需要做的准备,请看这里

安装维护平台

      在架空管道等其他不便安装和维护的场合,需要加装安装维护平台;平台上需要开取样孔、粉尘仪孔、温压流孔、环保比对孔等

分析小屋要求

      位置:尽量靠近测量位置(可以考虑在烟道或者烟囱的下面)。

      建筑尺寸:监测房的使用面积应不小于 9 平方米(单套系统),室内净高不小于 2.6m,放置体积为 800mm*800mm*2000mm 的机柜。

      室内环境要求:室内环境温度在 15~30℃之间;相对湿度在 80%以下有通风设施和空调;安装地点应清洁,无机械震动,附近不应有强电磁场干扰。

      监测房内应有照明。电源线通过缆沟进入到仪器机柜的下面。机柜与墙壁之间的距离不小于 500mm。

      在分析小屋机柜背面墙壁上,距离地面高度的 2.5m 处,为样气管路及电缆管路开孔,开孔尺寸为 200*200mm,开孔数量 1 个;在机柜背面墙壁下方开一孔,规格为ф50,作为废水排放口。

开孔位置要求

      1 选点要求

安装位置应能准确可靠地连续监测固定污染源烟气排放状况。

      2 一般要求

安装位置位于固定污染源排放控制设备的下游。

不受环境光线和电磁辐射的影响。

烟道或烟囱震动幅度尽可能小。

安装位置应不漏气,避免烟气中水滴和水雾的干扰。

工作区域必须提供永久性的电源,以保障烟气 CEMS 的正常运行。

采样或监测平台易于人员到达,有足够的空间,便于日常维护和比对监测。当采样平台设置在离地面高度≥5 米时,应有通往平台的 Z 字梯/旋梯/升降梯。

       为室外的烟气 CEMS 装置提供掩蔽所,以便在任何天气条件下不影响烟CEMS 的运行和不损害维修人员的健康,能安全地进行维护。安装在高空位置的烟气 CEMS 要采取措施防止发生雷击事故,做好接地,以保证人员和仪器运行的安全。


seo seo